Better Value for
RF & Microwave Components
Home > Support > FAQ

What Can RF ONE Offer for 5G Applications

5G is at the heart of existing and future communications like streaming video in consumer mobile demands, connecting vehicles, building smart cities, fiber-over-the-air and much more. In comparison with previous generations, 5G supports significantly faster mobile broadband speeds and also can enable full potential of the Internet of Things.

In order to deliver widespread coverage and support a wide range of use cases, 5G spectrum is across low, mid and high bands.

➤Low-bands which is sub-1GHz (typically 400MHz, 600MHz, 700MHz) support widespread coverage, such us indoors, urban and rural areas.

➤Mid-bands offer a good mixture of coverage and capacity benefits. Majority of networks include 3.3-3.8GHz-4.2GHz-4.8GHz-6GHz and 1500MHz, 1800MHz, 2100MHz, 2300MHz and 2600MHz.

➤High-bands support ultra-high broadband speeds, typically bands are 26GHz, 28GHz, 43.5GHz, 66GHz, 71GHz and may need additional new bands 92-114GHz.

RF ONE offers a wide range of passive components and interconnection products covering low-medium-high bands for 5G applications. Please check the below links to learn more.

RF Fixed Attenuators for 5G
RF ONE fixed attenuators for 5G wireless and telecom applications offer a wide range of power levels and maximum operating frequencies up to 67 GHz. These fixed attenuators offer stainless steel construction and are available in SMA, 2.92 mm, 2.4mm and 1.85mm connector designs.

🔗 SMA Fixed Attenuators, 2 Watt, DC-27GHz
🔗 2.92mm Fixed Attenuators, 2 Watt till 100 Watt, DC-40GHz
🔗 2.4mm Fixed Attenuators, 2 Watt till 35 Wat, DC-50GHz
🔗 1.85mm Fixed Attenuators, 2 Watt till 13 Watt, DC-67GHz

RF Termination Loads for 5G

RF ONE termination load for 5G wireless applications are up to 40 GHz, 50 GHz, and 67 GHz. These 5G RF loads  are available in SMP, Mini SMP, SSMA, 2.92mm, 2.4mm and 1.85mm connector series, with VSWR as low as 1.1.

🔗 SMP, Mini SMP, SSMA Termination Loads, 2 Watt, DC-40GHz
🔗 2.92mm Termination Loads, 2 Watt till 100 Watt, DC-40GHz
🔗 2.4mm Termination Loads, 2 Watt till 35 Wat, DC-50GHz
🔗 1.85mm Termination Loads, 2 Watt till 13 Watt, DC-67GHz

DC Block for 5G
DC blocks are used to prevent the flow of direct current frequencies to RF signals. RF ONE’s inner DC blocks are available in choices of SMA, N, 2.92mm, 2.4mm and 1.85mm male/female.

🔗 Inner DC Block, N Type
🔗 Inner DC Block, SMA
🔗 Inner DC Block, 10 MHz to 40 GHz, 2.92mm
🔗 Inner DC Block, 10 MHz to 50 GHz, 2.4mm
🔗 Inner DC Block, 10 MHz to 67 GHz, 1.85mm

Waveguide Components for 5G
RF ONE precision waveguide components for 5G wireless applications include waveguide to coax adapters, waveguide terminations that support fifth generation cellular development and test environments for mmWave frequency bands.

🔗 Waveguide to 1.0mm, 1.85mm, 2.4mm, 2.92mm Coax Adapters, WR10 to WR42
🔗 Waveguide to SMA, N type, DIN 7/16 Coax Adapters, WR42 to WR975
🔗 Double Ridge Waveguide to 2.4mm, 2.92mm, SMA, N Coax Adapter, WRD110 to WRD840
🔗 Low Power Waveguide Termination Loads, WR19 to WR650
🔗 Medium and High Power Waveguide Termination Loads

Directional Coupler for 5G
RF ONE provides coaxial directional couplers covering frequency ranges up to 40 GHz, nominal coupling values including 6dB, 10dB, 16dB, 20dB, 30dB. These couplers are suitable for broadband applications with optimized matching and high directivity performance.

🔗 2.92mm Directional Coupler From 1GHz to 40GHz Rated to 20 Watt
🔗 SMA Directional Coupler From 2GHz to 18GHz Rated to 20 Watt

Wilkinson Power Dividers for 5G
RF ONE's lines of 2-way and 4-way RF power dividers for 5G wireless and mobile applications offer wideband operating frequency ranges up to 40 GHz, available with SMA, N type, 2.92mm etc.

🔗 Wilkinson Power Dividers, 2 Way
🔗 Wilkinson Power Dividers, 4 Way

RF Adapters for 5G
RF ONE’s broad offering of RF adapters for 5G applications provides high-performance solutions for adjoining connection types that would not otherwise mate and protecting connectors on expensive equipment that have a high number of connect/disconnect cycles. We have the right adapter to meet your specific 5G mobile/wireless application needs for size, frequency, signal power, PIM level, durability, and space limitations.

🔗 Adapters, 1.85mm, 2.4mm, 2.92mm, 3.5mm, SSMA, SMA, N, In Series
🔗 Adapters, 1.85mm, 2.4mm, 2.92mm, 3.5mm, SSMA, SMA, N, SMP, SSMP, Between Series
🔗 Low PIM Adapter DIN 7/16, N, 4.3-10, 4.1-9.5, 2.2-5, NEX10, In Series
🔗 Low PIM Adapter DIN 7/16, N, SMA, 4.3-10, 4.1-9.5, 2.2-5, NEX10, Between Series

RF Cable Assemblies for 5G
RF ONE’s high-performance, rugged cable assemblies for 5G applications have low VSWR and insertion loss properties. They offer excellent phase stability under flexure and operate up to a maximum frequency of 110 GHz, depending on cable type.

🔗 Armored Bench Test Cables up to 110 GHz
🔗 Precision Phase Stable Test Cables up to 67 GHz
🔗 Tight Bend Flexible Interconnect Cables up to 50 GHz
🔗 Low Loss Phase Stable Cables for Interconnect up to 67 GHz
🔗 Phase Matched Cable Assemblies

Band Stop Filters for 5G
RF ONE is capable of providing standard and custom band stop filters for 5G bands.

🔗 Band Stop Filters