5G is at the heart of existing and future communications like streaming video in consumer mobile demands, connecting vehicles, building smart cities, fiber-over-the-air and much more. In comparison with previous generations, 5G supports significantly faster mobile broadband speeds and also can enable full potential of the Internet of Things.
In order to deliver widespread coverage and support a wide range of use cases, 5G spectrum is across low, mid and high bands.
➤Low-bands which is sub-1 GHz (typically 400 MHz, 600 MHz, 700 MHz) support widespread coverage, such us indoors, urban and rural areas.
➤Mid-bands offer a good mixture of coverage and capacity benefits. Majority of networks include 3.3-3.8 GHz, 4.2-4.8 GHz, 6GHz and 1500 MHz, 1800 MHz, 2100 MHz, 2300 MHz and 2600 MHz.
➤High-bands support ultra-high broadband speeds, typically bands are 26 GHz, 28 GHz, 43.5 GHz, 66 GHz, 71 GHz and may need additional new bands 92-114 GHz.
RF ONE offers a wide range of passive components and interconnection products covering low-medium-high bands for 5G applications. Please check the below links to learn more.
RF Fixed Attenuators for 5G
RF ONE fixed attenuators for 5G wireless and telecom applications offer a wide range of power levels and maximum operating frequencies up to 110 GHz. These fixed attenuators offer stainless steel construction and are available in SMA, 2.92 mm, 2.4mm 1.85mm and 1.0mm connector designs.
RF Termination Loads for 5G
RF ONE termination load for 5G wireless applications are up to 40 GHz, 50 GHz, 67 GHz and 110 GHz. These 5G RF loads are available in SMP, Mini SMP, SSMA, 2.92mm, 2.4mm, 1.85mm, 1.35mm, and 1.0mm connector series, with VSWR as low as 1.1.
DC Block for 5G
DC blocks are used to prevent the flow of direct current frequencies to RF signals. RF ONE’s inner DC blocks are available in choices of SMA, N, 2.92mm, 2.4mm and 1.85mm male/female.
View RF ONE DC BlocksRF ONE precision waveguide components for 5G wireless applications include waveguide to coax adapters, waveguide terminations that support fifth generation cellular development and test environments for mmWave frequency bands.
Directional Coupler for 5G
RF ONE provides coaxial directional couplers covering frequency ranges up to 40 GHz, nominal coupling values including 6 dB, 10 dB, 16 dB, 20 dB, 30 dB. These couplers are suitable for broadband applications with optimized matching and high directivity performance.
View RF ONE Directional Coupler
Wilkinson Power Dividers for 5G
RF ONE's lines of 2-way and 4-way RF power dividers for 5G wireless and mobile applications offer wideband operating frequency ranges up to 40 GHz, available with SMA, N type, 2.92mm etc.
RF Adapters for 5G
RF ONE’s broad offering of RF adapters for 5G applications provides high-performance solutions for adjoining connection types that would not otherwise mate and protecting connectors on expensive equipment that have a high number of connect / disconnect cycles. We have the right adapter to meet your specific 5G mobile/wireless application needs for size, frequency, signal power, PIM level, durability, and space limitations.
RF Cable Assemblies for 5G
RF ONE’s high-performance, rugged cable assemblies for 5G applications have low VSWR and insertion loss properties. They offer excellent phase stability under flexure and operate up to a maximum frequency of 110 GHz, depending on cable type.
Band Stop Filters for 5G
RF ONE is capable of providing standard and custom band stop filters for 5G bands.
