Blog

03 September 2021

Ultra-flexible phase stable UF360 40GHz Cable Assembly

RF ONE offers the Ultra-flexible phase stable UF360 cable assembly operating to 40 GHz. The stranded silver plated copper center conductor enhances its flexibility and mechanical phase stability, furthermore, the unique design is the PTFE wrapped jacket. Compared with the FEP jacket, it is more flexible and it overcomes the shortcoming of conventional PUR jacket which can only withstand + 85 degree C. This PTFE jacket operates to min 200 degree C and maintains its mechanical and electrical inte

16 March 2021

RF ONE: Offering High-Quality Phase Matched Cable Assemblies

Cable phase is affected by slight variations in materials and manufacturing tolerances, even for two apparently identical coaxial cable assemblies, they may exhibit different phase characteristics.
RF ONE offers 40 GHz delay matched cable assemblies in pairs that are held to phase tolerance as tight as within +/-1 pico second.

21 January 2021

Phase Stable Armored Test Cable Assemblies

RF ONE 40 GHz, 50 GHz and 67 GHz phase stable low loss test cable assemblies are supplied with FEP jacket or with additional PTFE braiding armor options. These armored cables are flexible, crush & abrasion resistant and RoHS compliant. Shipped in stock or less than 1 week with custom lengths, connector options include 1.85mm, 2.4mm, 2.92mm, 3.5mm and 27 GHz SMA.

08 September 2020

Salt Spray Test on SMA 2W Attenuators

Worried about the corrosion resistance performance? RF ONE implemented a salt spray test on the SMA 2W attenuators per MIL-STD-202G Method 101, Condition B.
After the 48 hour test, there is no evidence of corrosion or pitting visually examined by the third party test lab. We further checked the RF performance and there is no observable change on the VSWR and accuracy before and after the salt spray test.

07 April 2020

High Power Low Loss and Phase Stable Cable PL800

When high power,low loss and phase stability are critical, RF ONE's PL800 cable can be a option. Similar performance to H+S's SUCOFLEX106 & Gore's CXN3450, at 18 GHz sea level, average power as high as 398W, attenuation is 0.67 dB/meter for cable only, phase stability max ±5°. Be noted the entire cale assembly's power handling is limited by the power rates of connectors.

29 March 2020

High Performance Phase Stable Flexible PL230P Cable up to 70GHz

RF ONE's high performance phase stable flexible PL230P cable works up to 70 GHz, typical VSWR 1.30, max VSWR 1.40.
Built with a reinforced sleeve, the neck point is under exceptional protection and no longer a weak point during the bending and flexing process.

25 March 2020

High Precision Microwave and mmWave Adapters from RF ONE

RF ONE offers a huge selection of high precision RF/Microwave and mmWave adapters from stock, including SMA, SSMA, SMP, BNC, Type-N, TNCA, 3.5mm, 2.92mm(K type), 2.4mm,1.85mm(V type),1.0mm etc, in-series and between-series, available in flange, bulkhead types, right angle and straight body styles. These adapters can be widely used in general purpose or precision test & measurement, allowing connection between series of connectors.

22 January 2020

Waveguide WR187 to SMA Adapter

RF ONE has WR187( right angle) to SMA male & SMA female waveguide to coaxial adapter available. It operates in C band from 3.94 GHz to 5.99 GHz, with max VSWR 1.2. Like all of our other connectors, SMA is in passivated stainless steel body, with 1.27um gold plating on BeCu center contact. Check our waveguide to coax adapter for more waveguide to coax options.

15 November 2019

Newly Expanded mmWave Product Family-1mm Precision Adapter

We are pleased to inform that RF One 's 1mm precision adapters have been released.
These 1mm adapter are manufactured with stainless steel bodies and are built to IEC61169 (Interface) and MIL-DTL-45204( Center contact BeCu Plating).

27 July 2019

DC-50GHz 2W 2.4mm Attenuators

RF ONE is excited to introduce our new 50GHz 2W 2.4mm Male/Female attenuators, now available in a range of attenuation values from 1-10dB, 20/30dB. With a maximum VSWR of 1.45:1 to 50GHz and a length of only 16.5mm, these attenuators are perfect for high-frequency applications that demand precision signal control.

12345page: Go

Language